PDA

View Full Version : oil pump help



bobber47
11-07-2004, 01:41 PM
ok have stripped more of my chop down need some more help regarding the oil pump i have posted a pic with numbers and relavant questions can anyone help? i know this is gonna seem stupid to some of you but im not sure about the set up because it was done by another person so im just making sure ok

1 is this the return
2 is this the oil input
3 this should be the check valve i need to reseat ball bearing in ?
4 should this have a ball bearing in it as nothing in there only a spring
5 its ok got this sorted filter for tappet feed no ball bearing
any help will be gratefully recieved

wreckerman
11-07-2004, 01:51 PM
see if this picture will help any , and yes there should be a ball bearing in there it might be stuck but you need one in there

bobber47
11-07-2004, 06:11 PM
thanks wrecker ok so numbers 3 and 4 both should have ball bearings and i should check there seating to is that right wrecker

Ratbike
11-07-2004, 07:36 PM
Hi Oz

Olny the check valve should have a ball bearing in it the relief valve should have a spring and slide.