View Full Version : Problem with my fatbob

01-21-2013, 05:08 PM
I had some custom exhaust, air cleaner, and a power commander installed on my fatbob about 2-3 months ago. The next 3-4 time I rode it was fine but the bike sat for about a month and when I went to ride it was running really rough. I started heading home after about 2 miles when the bike just quit running. I took out all the old gas and changed the plugs but when I went to start it I had white smoke come out of the air cleaner and the bike would not start. Can anybody point me in the right direction or have any suggestions? Thanks

01-21-2013, 08:57 PM
from what information you gave us, I would be looking at the power commander '
nothing to go wrong with the pipes or air cleaner, if you have a carb you might want to drain the bowl and clean out the jets
usually there are no problems with the fuel injection system and you could try some fresh plugs , but again I do not think it will be that