• Sponsored Words

  • Re: Entering Personal Security Number

    I believe the dealers set it. Mine was 1-1-1-1-1, but I was able to change it. After making the change, I made sure I was able to "use" the code to disarm the system. Mine worked. If yours reports all ones, then you are doing something wrong.
    Make sure you have the fob present, then turn the ignition to ign, then off, then ign, then off, then ign (ign 3 times). Quickly press the left turn signal 3 times. Press the right turn signal 1 time. Your signals should flash 3 times and the factory pin should appear in the odometer and the first digit (1) should be flashing. Now use the left turn signal to change the number from a 1 to the number of your choice, then use the right turn signal to "store" that number and move on to the next digit.
    Summary: Ign 3 times, left 3 times, right 1 time. Then left to change, right to store.
    Using the pin to disarm the system is different of course.
    Turn to ign, then quickly press and hold both turn signals until confirmation (odometer changes to hes waiting for input). Then left to change, right to store.
    Hope this helps.
    This article was originally published in forum thread: Entering Personal Security Number started by nmmng View original post
  • Recent Threads


    Sunday Sunday Sunday!!

    Thread Starter: Wild1Poet2

    Still looks rainy here today. I was hoping for some clearing action.

    What is it with kids shooting up schools these days? These kids

    Today, 02:14 PM by Wild1Poet2 Go to last post


    Thread Starter: Cary

    Morning all. It's Saturday yet again.

    Work is very busy. The yard is turning green and all sorts of other colors. First spring here

    Today, 09:05 PM by arthureld Go to last post

    Friday O Friday

    Thread Starter: Wild1Poet2

    Friday makes folks happy. Feels like a long week. My son has been staying over with his three pit bulls. Just changes up the routine. And more noise.

    05-18-2018, 06:12 PM by Wild1Poet2 Go to last post

    Happy Thursday!!

    Thread Starter: smile2005

    Good Morning Fellas and Happy Thursday! Beautiful sunshiny day here in WI and heading into the 70's. Have a wonderful day!

    05-18-2018, 12:18 PM by Wild1Poet2 Go to last post

    Annoying Low Frequency Vibration Solved

    Thread Starter: JD

    Figured out an annoying rattle was caused by the rubber grommets just under the saddlebags that mount the ends of the mufflers to the chassis. The rubber

    05-17-2018, 03:23 PM by JD Go to last post