• Sponsored Words

  • Re: Entering Personal Security Number

    I believe the dealers set it. Mine was 1-1-1-1-1, but I was able to change it. After making the change, I made sure I was able to "use" the code to disarm the system. Mine worked. If yours reports all ones, then you are doing something wrong.
    Make sure you have the fob present, then turn the ignition to ign, then off, then ign, then off, then ign (ign 3 times). Quickly press the left turn signal 3 times. Press the right turn signal 1 time. Your signals should flash 3 times and the factory pin should appear in the odometer and the first digit (1) should be flashing. Now use the left turn signal to change the number from a 1 to the number of your choice, then use the right turn signal to "store" that number and move on to the next digit.
    Summary: Ign 3 times, left 3 times, right 1 time. Then left to change, right to store.
    Using the pin to disarm the system is different of course.
    Turn to ign, then quickly press and hold both turn signals until confirmation (odometer changes to hes waiting for input). Then left to change, right to store.
    Hope this helps.
    This article was originally published in forum thread: Entering Personal Security Number started by nmmng View original post
  • Recent Threads

    Robby

    Sunday Morning Coffee

    Thread Starter: Robby

    Good morning all. Help yourself to the coffee. I like mine black and strong so manup and grab some. Wide I have a discone antenna for scanning. It is

    Today, 02:41 AM by Wild1Poet2 Go to last post
    Robby

    Saturday Stuff

    Thread Starter: Robby

    Went to breakfast with some members of a ham radio club, then to the lodge to pick up this weeks bill to pay and now home. Today is my better half's birthday

    Yesterday, 02:03 AM by Wild1Poet2 Go to last post
    Wild1Poet2

    Friday Friday Friday

    Thread Starter: Wild1Poet2

    friday it is. This week seemed to pass slow. I hope the day goes quick.






    04-20-2018, 02:56 PM by Wide Go to last post
    arthureld

    Thursday

    Thread Starter: arthureld

    Good morning bikers.

    I'm on Long Island today with my wife. We are finally moving the rest of our junk to FL. Actually, a trucking company

    04-19-2018, 06:58 PM by Wild1Poet2 Go to last post
    Wild1Poet2

    Wednesday Wednesday

    Thread Starter: Wild1Poet2

    Good morning everyone. Hope everybody is doing fine. The temps have warmed up enough that they can fill in potholes around here. There's a few good

    04-18-2018, 03:19 PM by Wide Go to last post