• Sponsored Words

  • Re: Entering Personal Security Number

    I believe the dealers set it. Mine was 1-1-1-1-1, but I was able to change it. After making the change, I made sure I was able to "use" the code to disarm the system. Mine worked. If yours reports all ones, then you are doing something wrong.
    Make sure you have the fob present, then turn the ignition to ign, then off, then ign, then off, then ign (ign 3 times). Quickly press the left turn signal 3 times. Press the right turn signal 1 time. Your signals should flash 3 times and the factory pin should appear in the odometer and the first digit (1) should be flashing. Now use the left turn signal to change the number from a 1 to the number of your choice, then use the right turn signal to "store" that number and move on to the next digit.
    Summary: Ign 3 times, left 3 times, right 1 time. Then left to change, right to store.
    Using the pin to disarm the system is different of course.
    Turn to ign, then quickly press and hold both turn signals until confirmation (odometer changes to hes waiting for input). Then left to change, right to store.
    Hope this helps.
    This article was originally published in forum thread: Entering Personal Security Number started by nmmng View original post
  • Recent Threads


    Wednesday Coffee Wednesday

    Thread Starter: Wild1Poet2

    Morning biker hordes. I'm getting excited about tomorrow and the birth of my new granddaughter.

    I see on the news another tourist died

    Today, 08:27 PM by Wild1Poet2 Go to last post

    Tuesday Tuesday

    Thread Starter: Wild1Poet2

    Howdy folks. Everyone must be sleepin in a little and trying to catch up.

    Yesterday, 04:25 PM by Wild1Poet2 Go to last post


    Thread Starter: arthureld

    Good day bikers.

    I rolled out of bed early today for some reason. I've been having a tough time getting over my trip to Europe.

    06-17-2019, 07:30 PM by Wide Go to last post

    Sunday Sunday Sunday!!

    Thread Starter: Wild1Poet2

    Good morning ever body. Hope your weather is better than it is out here. At least I'm not working. I spent most of yesterday having to work on something

    Yesterday, 02:47 PM by Wide Go to last post

    Saturday is the day

    Thread Starter: Nitram_b4

    Good morning all
    Finally put a few good workouts together now I got something going on with a disc between my shoulder blades.. us old fuckers...

    06-15-2019, 04:16 PM by Wild1Poet2 Go to last post