• Sponsored Words

  • Re: Entering Personal Security Number

    I believe the dealers set it. Mine was 1-1-1-1-1, but I was able to change it. After making the change, I made sure I was able to "use" the code to disarm the system. Mine worked. If yours reports all ones, then you are doing something wrong.
    Make sure you have the fob present, then turn the ignition to ign, then off, then ign, then off, then ign (ign 3 times). Quickly press the left turn signal 3 times. Press the right turn signal 1 time. Your signals should flash 3 times and the factory pin should appear in the odometer and the first digit (1) should be flashing. Now use the left turn signal to change the number from a 1 to the number of your choice, then use the right turn signal to "store" that number and move on to the next digit.
    Summary: Ign 3 times, left 3 times, right 1 time. Then left to change, right to store.
    Using the pin to disarm the system is different of course.
    Turn to ign, then quickly press and hold both turn signals until confirmation (odometer changes to hes waiting for input). Then left to change, right to store.
    Hope this helps.
    This article was originally published in forum thread: Entering Personal Security Number started by nmmng View original post
  • Recent Threads

    Wild1Poet2

    Tuesday Tuesday

    Thread Starter: Wild1Poet2

    Another day in paradise. Next week is a short week for lots of folks with the July 4th holiday coming up. I need some downtime.

    Yesterday, 09:46 PM by Wide Go to last post
    KDC1956

    Fuel Tank

    Thread Starter: KDC1956

    Is there a way to pressure check a new fuel tank on the cheap I have a 2.1 fuel tank and want a 4.5 gallon fuel on my sportster but the shop around here

    06-24-2019, 10:55 PM by Wide Go to last post
    Wide

    Raise in Shine MONDAY

    Thread Starter: Wide

    Busy one thos morning started work early
    These long days are great for getting stuff done

    06-24-2019, 03:48 PM by Wide Go to last post
    cz831

    New member

    Thread Starter: cz831

    Howdy. Wanted to drop in and introduce myself. My names Cory from Cali. Just bought my first HD, a 2015 Dyna Low Rider. Iím new to HD but not new

    06-24-2019, 03:27 PM by cz831 Go to last post
    Slim

    Wheel

    Thread Starter: Slim

    I have a 2000 electro glide and have broken around 4-5 spokes, I can get a replacement wheel from a 2005 soft tail and want to know if it will fit. Thanks

    06-23-2019, 10:00 PM by Slim Go to last post