Results 1 to 3 of 3

Thread: 04 RKC Trouble Codes

  1. #1
    Senior Member Biker escorial's Avatar
    Join Date
    Mar 2006
    Location
    Chicago, IL
    Posts
    248

    04 RKC Trouble Codes

    After checking my codes for errors (which I found none) I pressed the odometer button and got a long number that started with PN XXXXXX-XXXXC I did not bother to wite them as they were scrolling by but I can go back and get them in needed.

    Any ideas? Could it be a part number for the Stage 1 intsall?

    TIA,
    John

  2. #2
    Administrator AdminSenior Member Wide's Avatar
    Join Date
    Aug 2004
    Location
    HCG World Headquarters, Signal Hill, CA
    Posts
    25,745

    Re: 04 RKC Trouble Codes

    Clear it out & start again
    .-/c-.,_ /
    (_)'==(_)

    "Logic will get you from A to B. Imagination will take you everywhere"

  3. #3
    Senior Member Biker escorial's Avatar
    Join Date
    Mar 2006
    Location
    Chicago, IL
    Posts
    248

    Re: 04 RKC Trouble Codes

    Quote Originally Posted by Wide
    Clear it out & start again
    Dont understand? I did go though "PSSPt" and received no errors.

    I just read this "If DTC’s are not to be cleared, Press and release the odometer reset button. Part number of module will be displayed. "

    What I was seeing was the PN of the module. after I pressed the odometer after seeing none.

    All is well,
    Thanks

Similar Threads

  1. Trouble codes on 97 FLHTCI
    By eg1997 in forum Evolution Models
    Replies: 0
    Last Post: 08-22-2007, 07:57 PM
  2. Trouble shooting the codes
    By trebor0301 in forum Tech Support Archives
    Replies: 5
    Last Post: 08-28-2006, 05:52 PM
  3. 1999 DWG Trouble Codes
    By Hydrorider in forum Tech Support Archives
    Replies: 1
    Last Post: 08-17-2006, 10:27 PM
  4. V-Rod Trouble codes
    By Wide in forum VRSC Models
    Replies: 0
    Last Post: 09-06-2005, 05:51 PM
  5. Diagnostic Trouble Codes
    By Nightrain502 in forum General Technical Advice Archives
    Replies: 2
    Last Post: 06-26-2005, 09:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •