Results 1 to 7 of 7

Thread: Entering Personal Security Number

  1. #1
    Junior Member Just broke my cherry!
    Join Date
    Mar 2007

    Entering Personal Security Number

    I just learned that if the alarm is activated but the key fobs are lost, the alarm module must be replaced. To prevent this a five number security code can be entered using the turn signal buttons. I believe I am following directions but the new number won't "take." I even tried letting the system tell me what numbers are in there but it reports back as all ones. That code does not work to disarm the system. Any ideas?

  2. #2
    Senior Member Senior Member
    Join Date
    Aug 2004
    71901, Ar, Hot Springs

    Re: Entering Personal Security Number

    Not sure what the factory preset is but both of my bikes were set at 2-2-2-2-2. Not sure if the dealership did it or if HD did it.

  3. #3
    Senior Member Senior Member Blackcloud41's Avatar
    Join Date
    Jul 2005
    Madison, Al

    Re: Entering Personal Security Number

    I believe the dealers set it. Mine was 1-1-1-1-1, but I was able to change it. After making the change, I made sure I was able to "use" the code to disarm the system. Mine worked. If yours reports all ones, then you are doing something wrong.
    Make sure you have the fob present, then turn the ignition to ign, then off, then ign, then off, then ign (ign 3 times). Quickly press the left turn signal 3 times. Press the right turn signal 1 time. Your signals should flash 3 times and the factory pin should appear in the odometer and the first digit (1) should be flashing. Now use the left turn signal to change the number from a 1 to the number of your choice, then use the right turn signal to "store" that number and move on to the next digit.
    Summary: Ign 3 times, left 3 times, right 1 time. Then left to change, right to store.
    Using the pin to disarm the system is different of course.
    Turn to ign, then quickly press and hold both turn signals until confirmation (odometer changes to hes waiting for input). Then left to change, right to store.
    Hope this helps.
    Leave the gun.....take the cannoli

    If I had known I was going to live this long I would have taken better care of myself!

  4. #4
    Senior Member Hardcore Biker 1524montana's Avatar
    Join Date
    May 2005
    Santa Monica, CA

    Re: Entering Personal Security Number

    I know this is an old post but I just tried doing my code. It worked perfect. I did a search to learn how to change the code entered by the stealership I purchased it from. Once I feel like getting off my arse, I'm going to change it to a more unique code. I highly recommend you learn how to do this. If you ever lose your FOB or your battery dies you'll be able to start your bike. FYI, mine was not 1-1-1-1-1.

  5. #5
    HCG Technical HCG TechnicalSenior Member JD's Avatar
    Join Date
    Aug 2004

    Re: Entering Personal Security Number

    +1 everyone with a newer bike should set this code (while their FOB is still working properly) and record it in a safe but accessable place. Chances are you will need to use it at some point

  6. #6
    Administrator AdminSenior Member Wide's Avatar
    Join Date
    Aug 2004
    HCG World Headquarters, Signal Hill, CA

    Re: Entering Personal Security Number

    Made a sticky
    .-/c-.,_ /

    "Logic will get you from A to B. Imagination will take you everywhere"

  7. #7
    Junior Member Just broke my cherry! dandolfn's Avatar
    Join Date
    Jun 2012
    Lake Placid, FL
    I had the same problem.

    Finally, since I had to go to the dealer anyway for a recall, I paid them to re-set it for me.

    It was worth it to avoid the aggravation.

Similar Threads

  1. Personal Worth
    By smile2005 in forum Pig Roast Tavern
    Replies: 5
    Last Post: 07-05-2006, 11:09 PM
  2. Personal Ads From Men
    By Major in forum Jokes & Humor
    Replies: 0
    Last Post: 01-09-2006, 10:22 AM
  3. Personal Ads Definitions
    By Tony in forum Jokes & Humor
    Replies: 1
    Last Post: 02-14-2005, 02:04 AM
  4. entering chat room
    By dreamcatcher in forum Web Site Issues & Suggestions
    Replies: 3
    Last Post: 08-17-2004, 11:51 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts