Results 1 to 7 of 7

Thread: oil line routing, 1340 stock evo

  1. #1

    oil line routing, 1340 stock evo

    Hello again everyone, Well I think I have finally found the problem trying to adjust my pushrods. I took the lifters out last night and soaked them in oil overnight. Seems maybe the shop I had it at probally just left them laying, who knows. Anyways can some one help me out with the routing of the oil lines? I looked in the manuel ,but either that shop put my oil lines on wrong or I'm not reading the manuel right. My oil light stays on always. Anyone got a pic of oil line routing to share? Please
    Ride Free Forever

  2. #2

    Re: oil line routing, 1340 stock evo

    Well I didn't get any responses to the oil line routing, so i checked the internet very deeply. Finally after a long search I Found this one. After checking it to my oil lines. Of course the shop I had my bike at, had the feed and return lines crossed. I connected them according to the diagram and "walla" now my motor is no longer making the obscene noises it was making. Now its on the checking the Ultima ignition they probally screwed up to. What a mess
    Attached Images Attached Images

  3. #3
    Senior Member Senior Member Nitram_b4's Avatar
    Join Date
    Nov 2006
    Location
    SC
    Posts
    3,469

    Re: oil line routing, 1340 stock evo

    HOW LONG YOU RUN IT WITH THE OIL LINES SCREWED UP...HOPE NOT VERY LONG
    "Age is a question of mind over matter. If you donít mind, it doesnít matter."

  4. #4
    Senior Member Senior Member wreckerman's Avatar
    Join Date
    Aug 2004
    Location
    cleveland TN
    Posts
    17,442

    Re: oil line routing, 1340 stock evo

    glad you got it figured out , good luck on the ignition
    Bucket list are for Sissie, men do it while they can enjoy it

  5. #5

    Re: oil line routing, 1340 stock evo

    How ya doing Nitram, no it didn't run to long maybe about 3 - 4 miles back to the house from the shop.
    Ride Free Forever

  6. #6
    Junior Member Just broke my cherry!
    Join Date
    Apr 2013
    Posts
    1

    oil routing

    will wrong routing cause motor to run rough

  7. #7
    Senior Member Senior Member wreckerman's Avatar
    Join Date
    Aug 2004
    Location
    cleveland TN
    Posts
    17,442
    no wrong routing will not cause your engine to run rough
    Bucket list are for Sissie, men do it while they can enjoy it

Similar Threads

  1. looking for a little mor H.P on 1340
    By gambler_m_99 in forum General Technical Advice Archives
    Replies: 9
    Last Post: 01-10-2010, 03:30 AM
  2. 1340 upgrades
    By dynaconv in forum Evolution Models
    Replies: 14
    Last Post: 02-03-2008, 02:20 AM
  3. 1340 rpm
    By gambler_m_99 in forum General Technical Advice Archives
    Replies: 1
    Last Post: 03-11-2007, 01:38 PM
  4. oil line routing for 81 shovel
    By tobias in forum Flathead, Knucklehead, Panheads, Shovelheads
    Replies: 1
    Last Post: 06-05-2006, 02:59 AM
  5. 91 evo oil line routing WE NEED HELP!!!
    By mollyoo0 in forum Tech Support Archives
    Replies: 11
    Last Post: 03-19-2005, 06:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •