HarleyChatGroup now on the mobile TapaTalk Network
Results 1 to 10 of 10

Thread: Sealing bead on a 250 tire.

  1. #1
    Senior Member Senior Member Bigshovel's Avatar
    Join Date
    Aug 2004
    Location
    Pasadena, Tx.
    Posts
    1,406

    Sealing bead on a 250 tire.

    O.K. I have been fighting this tire for 2 hours and can't get the bead to seat. I don't normally do my own tires as I'm not really a big tire guy, (pun intended) but I need to get this bitch seated so I can complete the roller. I have tried all the tricks I know short of starting fluid. Any ideas from some more experienced fat tires guys would be appreciated.

  2. #2
    Senior Member Senior Member wreckerman's Avatar
    Join Date
    Aug 2004
    Location
    cleveland TN
    Posts
    16,696

    Re: Sealing bead on a 250 tire.

    i hate tires as much as any one
    try putting a strap around the middle of the tire
    pushing the tire against a wall while you try to work the other areas
    gluing one side of tire to the rim then put it back up and try pressing down on tire
    get tire real hot so it is more playable
    that is about it for my ideas
    Bucket list are for Sissie, men do it while they can enjoy it

  3. #3
    Senior Member Senior Member Bigshovel's Avatar
    Join Date
    Aug 2004
    Location
    Pasadena, Tx.
    Posts
    1,406

    Re: Sealing bead on a 250 tire.

    Thenks Rex, the strap was my first trick with the valve out and 150 psi wide open. The only way I know how to heat a tire is well.......you know.

  4. #4
    Senior Member Senior Member
    Join Date
    Jan 2005
    Location
    At the strip joint!!!
    Posts
    6,250

    Re: Sealing bead on a 250 tire.

    The guys I see here put a wratcheting strap around the outside of the tire and titen the bitch down.........add 150 psi and walla!!!

    Course if I tried it the cocksucker wouldnt work......
    Its a dog eat dog world and I'm wearin milkbone underware!!!!!!!!!!!!!!!!!!

  5. #5
    Senior Member Biker
    Join Date
    Dec 2008
    Location
    Blue Mountains of PA
    Posts
    120

    Re: Sealing bead on a 250 tire.

    A ratcheting strap and removing the stm core was my suggestion as well.

    I've done large tires (Truck) with starting fluid and a match, but it's dangerous, although the results are what you're looking for.....
    “The difference between the right word and the nearly right word is the difference between lightning and lightning bug.”

    Hunter S. Thompson

  6. #6
    Senior Member Senior Member
    Join Date
    Oct 2005
    Location
    By The Ocean, in SC.
    Posts
    7,564

    Re: Sealing bead on a 250 tire.

    Starting fluid sparingly..
    Wanted Woman
    Must be able to Clean, Sew Leather,
    Tune a Harley engine, polish Chrome
    Must have a Harley
    Please send pic of Harley....

  7. #7
    Administrator Senior Member Wide's Avatar
    Join Date
    Aug 2004
    Location
    HCG World Headquarters, Signal Hill, CA
    Posts
    18,939

    Re: Sealing bead on a 250 tire.

    Yep I use a couple tiedowns couple inches apart then pump the tire up

    Some lube works great. I use something called alconox. real slippery and leave no residue, Use anything slippery you can.

    Leave tire in a warm place also helps but try a couple 3 straps


    Just dont wack yourself doing it
    .-/c-.,_ /
    (_)'==(_)


    "parts left out cost nothing and create no service problems" Boss Kettering

  8. #8
    Senior Member Senior Member Bigshovel's Avatar
    Join Date
    Aug 2004
    Location
    Pasadena, Tx.
    Posts
    1,406

    Re: Sealing bead on a 250 tire.

    How a bout a mixture of Alcohol and dish soap?

  9. #9
    Administrator Senior Member Wide's Avatar
    Join Date
    Aug 2004
    Location
    HCG World Headquarters, Signal Hill, CA
    Posts
    18,939

    Re: Sealing bead on a 250 tire.

    Try anything, the rubber will absorb even oil
    .-/c-.,_ /
    (_)'==(_)


    "parts left out cost nothing and create no service problems" Boss Kettering

  10. #10
    Senior Member Senior Member IamVince's Avatar
    Join Date
    Apr 2005
    Location
    Virgin Islands
    Posts
    1,009

    Re: Sealing bead on a 250 tire.

    messy but works....pack bead with grease

Similar Threads

  1. Rear Tire.....Car Tire???
    By Silver$ in forum Frame, Suspension
    Replies: 2
    Last Post: 05-19-2009, 06:26 PM
  2. Fat-Ass Tire
    By DENVERUFO in forum Scratch Bike Building
    Replies: 13
    Last Post: 06-09-2007, 09:39 PM
  3. I Need A New Tire
    By Elvis in forum Installing Parts & Accessories Archive
    Replies: 19
    Last Post: 07-22-2006, 01:06 PM
  4. Slip on exhaust sealing??
    By RANCHHAND in forum General Technical Advice Archives
    Replies: 5
    Last Post: 09-10-2005, 12:59 PM
  5. Tire off the rim
    By Ironhead80 in forum Installing Parts & Accessories Archive
    Replies: 7
    Last Post: 11-29-2004, 12:45 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •