I bought a wide glide front end from a Dyna. I'm putting it on a Kraft Tech rigid frame. I have the bearing cups presed into the frame, the lower tree dust shield and lower bearing pressed in. Triple tree top bearing and top dust shield are in. I'm a bit confused as to the order of the rest.
I still have the lock tab plate, top nut with locking grooves and then one more nut. Any help on the instal order of the rest would be awesome. The locking mechanism doesn't seem right to me for some reason.
"Lifes a gamble and you might lose" - Mike Ness
Nevermind guys I figured it out, but i'll answer my own question in case someone else was wondering.
After the top dust shield goes the locking nut (with notches), the top tree, the lock washer which locks into the top tree then the top nut and a fancy cover over the top nut if you want to dress it up.
"Lifes a gamble and you might lose" - Mike Ness
Reply With Quote
