Rear Drive Belt?

[whitehog69]

I have a 1994 FLSTF how do i find out which rear drive belt I need for it? i counted around the rear pully half way and counted 36 teeth. 1 1/2 wide. dont have the old belt lost in after it broke.

[Kagan]

It's 40023-86. The belt is 132T for 32T x 70T. You may have miscounted with the rear at 36 half-way. That would be a 72T. If you really do have a 72T rear x 32T you're into something else. Let us know.

[Robby]

Hello Kagan! Good to see you check in. Long time

[whitehog69]

Thanks Kagan I'll recheck my count. Im pretty sure its stock.

[INTHEWIND]

I just got done putting a drivebelt on my 89fxrs noticed that the drivebelt is about 1/4 in away from my rear tire seemes close when i put my rubber gard on the rubber is almost on the tire , i put a solid rear wheel off a fatboy on it and the numbers on both wheels were the same , does any one know if this is mormal

[Nitram_b4]

Think that is 1 1/2" 132T belt needed for that fat boy

[whitehog69]

Got the right belt. the 132 was the one . thanks for the help guys a beer for you all!!!!!

[JD]

I just got done putting a drivebelt on my 89fxrs noticed that the drivebelt is about 1/4 in away from my rear tire seemes close when i put my rubber gard on the rubber is almost on the tire , i put a solid rear wheel off a fatboy on it and the numbers on both wheels were the same , does any one know if this is mormal

Yes this is normal clearance

[INTHEWIND]

yes this is normal clearance

thanks jd so far so good just got back from some long rides and everything seems ok thanks for everyones help